famous Electrostatic air conditioner filter
Release time:
18 Apr,2025
Electrostatic air conditioner filter has a high filtration efficiency. It can effectively capture a wide range of particles including dust pollen and even some fine pollutants in the air.
The air filter is a device that purifies the air. Air filters are divided into dry and wet types. The dry type is the most commonly used on car models. Its material is filter paper or non-woven fabric.
Electrostatic air conditioner filter has a high filtration efficiency. It can effectively capture a wide range of particles including dust pollen and even some fine pollutants in the air. This helps to improve the air quality in the room where the air conditioner is installed.
The electrostatic mechanism allows the filter to attract and hold particles more effectively. As air passes through the filter the charged particles are attracted to the filter surface due to electrostatic forces. This ensures that a large proportion of contaminants are removed from the air stream.
Compared to some traditional filters electrostatic air conditioner filters are relatively easy to clean. Users can often clean them by simple methods such as vacuuming or gently washing. This not only extends the life of the filter but also reduces the cost of replacement.
Electrostatic air conditioner filter is made of high - quality materials that can withstand the continuous airflow and pressure from the air conditioner. It can maintain its filtration performance over a long period of time.
Role
1. Make the air-conditioning grid close to the shell to ensure that unfiltered air will not enter the compartment;
2. Separate dust, pollen, abrasive particles and solid impurities in the air;
3, adsorption of water in the air, soot, ozone, odor, carbon oxides, so2, co2, can be strong and lasting adsorption of moisture;
4. Make the car glass not covered with water vapor, the driver's vision is clear, and the driving is safe; 5. Ensure that the air in the cabin is clean without breeding bacteria.
Maintenance method
1. Take out the main filter element from the air filter housing, tap the end cover of the filter element, and vibrate the dust on the filter element.
2, with a pressure of not more than 0.5MPa dry compressed air blowing from the inside to the outside.
3. After cleaning the dust for 5 times, the main filter element should be replaced together with the safety filter element. When the filter element is found to be damaged, the filter element should be replaced.
4. For the air filter with dust box, the dust in the dust box should be cleaned.
Key words:
- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas
More information
Mobile/WeChat:
E-mail:
